It is used to repeat HB brand solar powered active detector signal to long distance receiver.
Main functions and features:
1.It automatically learns HB brand wireless solar powered detectors.
2.It can repeat maximum 50 pairs of solar powered wireless active detectors.
3.It supports maximum 4 levels of 4 repeaters to transmit to longer distance.
4.It should be installed indoor to avoid water or lightning stroke.
Specification:
1.Frequency: 433MHz
2.Operating Voltage:12V~15V
3.Operating current under receiving mode: 46mA
4.Operating current uder transmitting mode:290mA~300mA
5.Transmitting Distance:1km (1 level)
6.Operating temperature: -40℃~85℃
Total 2 buttons(Status Key and Erase Key)
Total 4 indicators(Run,RF,Learn,Erase)
How to connect detectors or remote controllers to the Repeater:
1. Power on,”Run”light on.
2. Press the Status Key 3 times,”Learn”light on(means the repeater is on learning mode)
3. Trigger the detector or remote controller,”Learn”blink once and a beep prompt.
One Repeater can connect 50 pieces detectors or remote controllers,so please connect the other ones by the same way
4. Press “Status Key” once,Exit the learning mode,and”Learn”light off
5. If work normally,“RF” light will blink while you trigger the detectors or remote controllers.
How to delete detectors of remote controllers
1. Power on,”Run”light on
2. Press the Status Key 3 times,”Learn”light on
3. Delete one detector(the recent one)--Press”Erase Key”once,and”Erase”light on 1 second.
Delete all the detectors--Press”Erase Key”3 seconds,”Erase”light on and a beep prompt.
How to set the grade of the repeater:
At present,the repeater has 4 grades,and the grade can be set by the DIP switch;(factory default is grade 1---the”1”switch is on the”ON”direction,the other switches are on the opposite direction;if you want to set the repeater to grade 2,make the”2”switch on the”ON”direction,and the other switches on the opposite direction;So on...)
【Notice】Make sure the repeater is on Grade 1 when you connect the detectors to it.
Grade 1 Repeater only can forward the signal from the Detectors;
Grade 2 Repeater only can forward the signal from Grade 1 Repeater;
Grade 3 Repeater only can forward the signal from Grade 2 Repeater;
Grade 4 Repeater only can forward the signal from Grade 3 Repeater;
But Alarm host can receive the signal from all the repeaters and detectors.
Buy more HTZ solar outdoor indoor detectors and alarm accessory at
HTZ solar beam
