Addressable Fire Alarm Systems

Fire Alarm Control Panel (FACP) 10 loops is strictly conformable with Chinese National Standard Fire alarm control panel and fire protection linkage control system with a maximum capacity of max 64 loops connection with 15488 field devices. It has built-in linkage control and can work with other Tanda brand panels. It is suitable for using in large and medium fire alarm and protection security. This FACP uses two buses mode, monitoring up to 242 control points of every loop. Wall mounted design. It is compatible with complete range of electronic coding, remote control conding series' intelligent detectors, manual call point, input module, I/O module. The fire protection system can be divided into controller, detectors, modules and operation terminals. The FACP is combinded with main control module, driver board and communication board. Main control module uses the driving board to check the detectors, receive the digital signals and control the linkage modules. It also can be connected with other types of detectors such as flammable gas detector, alarm sensor, via input interface modules. The main control module gathers and deals with the information which received by the driving card to complete the control and functional operation. Isolator can be used for the security system properly working if there is fault part. The fire information is not only audible, optical and LCD displayed, recorded to printer log and the black box log. It can also be transited to FACP or CRT fire alarm dispay system via RS232.

...

...

...

Fire Alarm Control Panel (FACP) 10 loops is strictly conformable with Chinese National Standard Fire alarm control panel and fire protection linkage control system with a maximum capacity of max 64 loops connection with 15488 field devices. It has built-in linkage control and can work with other Tanda brand panels. It is suitable for using in large and medium fire alarm and protection security. This FACP uses two buses mode, monitoring up to 242 control points of every loop. Wall mounted design. It is compatible with complete range of electronic coding, remote control conding series' intelligent detectors, manual call point, input module, I/O module. The fire protection system can be divided into controller, detectors, modules and operation terminals. The FACP is combinded with main control module, driver board and communication board. Main control module uses the driving board to check the detectors, receive the digital signals and control the linkage modules. It also can be connected with other types of detectors such as flammable gas detector, alarm sensor, via input interface modules. The main control module gathers and deals with the information which received by the driving card to complete the control and functional operation. Isolator can be used for the security system properly working if there is fault part. The fire information is not only audible, optical and LCD displayed, recorded to printer log and the black box log. It can also be transited to FACP or CRT fire alarm dispay system via RS232.

...

...

...

Fire Alarm Control Panel (FACP) 10 loops is strictly conformable with Chinese National Standard Fire alarm control panel and fire protection linkage control system with a maximum capacity of max 64 loops connection with 15488 field devices. It has built-in linkage control and can work with other Tanda brand panels. It is suitable for using in large and medium fire alarm and protection security. This FACP uses two buses mode, monitoring up to 242 control points of every loop. Wall mounted design. It is compatible with complete range of electronic coding, remote control conding series' intelligent detectors, manual call point, input module, I/O module. The fire protection system can be divided into controller, detectors, modules and operation terminals. The FACP is combinded with main control module, driver board and communication board. Main control module uses the driving board to check the detectors, receive the digital signals and control the linkage modules. It also can be connected with other types of detectors such as flammable gas detector, alarm sensor, via input interface modules. The main control module gathers and deals with the information which received by the driving card to complete the control and functional operation. Isolator can be used for the security system properly working if there is fault part. The fire information is not only audible, optical and LCD displayed, recorded to printer log and the black box log. It can also be transited to FACP or CRT fire alarm dispay system via RS232.

...

...

...

Fire Alarm Control Panel (FACP) 10 loops is strictly conformable with Chinese National Standard Fire alarm control panel and fire protection linkage control system with a maximum capacity of max 64 loops connection with 15488 field devices. It has built-in linkage control and can work with other Tanda brand panels. It is suitable for using in large and medium fire alarm and protection security. This FACP uses two buses mode, monitoring up to 242 control points of every loop. Wall mounted design. It is compatible with complete range of electronic coding, remote control conding series' intelligent detectors, manual call point, input module, I/O module. The fire protection system can be divided into controller, detectors, modules and operation terminals. The FACP is combinded with main control module, driver board and communication board. Main control module uses the driving board to check the detectors, receive the digital signals and control the linkage modules. It also can be connected with other types of detectors such as flammable gas detector, alarm sensor, via input interface modules. The main control module gathers and deals with the information which received by the driving card to complete the control and functional operation. Isolator can be used for the security system properly working if there is fault part. The fire information is not only audible, optical and LCD displayed, recorded to printer log and the black box log. It can also be transited to FACP or CRT fire alarm dispay system via RS232.

...

...

...

Fire Alarm Control Panel (FACP) 10 loops is strictly conformable with Chinese National Standard Fire alarm control panel and fire protection linkage control system with a maximum capacity of max 64 loops connection with 15488 field devices. It has built-in linkage control and can work with other Tanda brand panels. It is suitable for using in large and medium fire alarm and protection security. This FACP uses two buses mode, monitoring up to 242 control points of every loop. Wall mounted design. It is compatible with complete range of electronic coding, remote control conding series' intelligent detectors, manual call point, input module, I/O module. The fire protection system can be divided into controller, detectors, modules and operation terminals. The FACP is combinded with main control module, driver board and communication board. Main control module uses the driving board to check the detectors, receive the digital signals and control the linkage modules. It also can be connected with other types of detectors such as flammable gas detector, alarm sensor, via input interface modules. The main control module gathers and deals with the information which received by the driving card to complete the control and functional operation. Isolator can be used for the security system properly working if there is fault part. The fire information is not only audible, optical and LCD displayed, recorded to printer log and the black box log. It can also be transited to FACP or CRT fire alarm dispay system via RS232.

...

...

...

Fire Alarm Control Panel (FACP) 10 loops is strictly conformable with Chinese National Standard Fire alarm control panel and fire protection linkage control system with a maximum capacity of max 64 loops connection with 15488 field devices. It has built-in linkage control and can work with other Tanda brand panels. It is suitable for using in large and medium fire alarm and protection security. This FACP uses two buses mode, monitoring up to 242 control points of every loop. Wall mounted design. It is compatible with complete range of electronic coding, remote control conding series' intelligent detectors, manual call point, input module, I/O module. The fire protection system can be divided into controller, detectors, modules and operation terminals. The FACP is combinded with main control module, driver board and communication board. Main control module uses the driving board to check the detectors, receive the digital signals and control the linkage modules. It also can be connected with other types of detectors such as flammable gas detector, alarm sensor, via input interface modules. The main control module gathers and deals with the information which received by the driving card to complete the control and functional operation. Isolator can be used for the security system properly working if there is fault part. The fire information is not only audible, optical and LCD displayed, recorded to printer log and the black box log. It can also be transited to FACP or CRT fire alarm dispay system via RS232.

...

...

...

Fire Alarm Control Panel (FACP) 10 loops is strictly conformable with Chinese National Standard Fire alarm control panel and fire protection linkage control system with a maximum capacity of max 64 loops connection with 15488 field devices. It has built-in linkage control and can work with other Tanda brand panels. It is suitable for using in large and medium fire alarm and protection security. This FACP uses two buses mode, monitoring up to 242 control points of every loop. Wall mounted design. It is compatible with complete range of electronic coding, remote control conding series' intelligent detectors, manual call point, input module, I/O module. The fire protection system can be divided into controller, detectors, modules and operation terminals. The FACP is combinded with main control module, driver board and communication board. Main control module uses the driving board to check the detectors, receive the digital signals and control the linkage modules. It also can be connected with other types of detectors such as flammable gas detector, alarm sensor, via input interface modules. The main control module gathers and deals with the information which received by the driving card to complete the control and functional operation. Isolator can be used for the security system properly working if there is fault part. The fire information is not only audible, optical and LCD displayed, recorded to printer log and the black box log. It can also be transited to FACP or CRT fire alarm dispay system via RS232.

...

...

...

Fire Alarm Control Panel (FACP) 10 loops is strictly conformable with Chinese National Standard Fire alarm control panel and fire protection linkage control system with a maximum capacity of max 64 loops connection with 15488 field devices. It has built-in linkage control and can work with other Tanda brand panels. It is suitable for using in large and medium fire alarm and protection security. This FACP uses two buses mode, monitoring up to 242 control points of every loop. Wall mounted design. It is compatible with complete range of electronic coding, remote control conding series' intelligent detectors, manual call point, input module, I/O module. The fire protection system can be divided into controller, detectors, modules and operation terminals. The FACP is combinded with main control module, driver board and communication board. Main control module uses the driving board to check the detectors, receive the digital signals and control the linkage modules. It also can be connected with other types of detectors such as flammable gas detector, alarm sensor, via input interface modules. The main control module gathers and deals with the information which received by the driving card to complete the control and functional operation. Isolator can be used for the security system properly working if there is fault part. The fire information is not only audible, optical and LCD displayed, recorded to printer log and the black box log. It can also be transited to FACP or CRT fire alarm dispay system via RS232.

...

...

...

Fire Alarm Control Panel (FACP) 10 loops is strictly conformable with Chinese National Standard Fire alarm control panel and fire protection linkage control system with a maximum capacity of max 64 loops connection with 15488 field devices. It has built-in linkage control and can work with other Tanda brand panels. It is suitable for using in large and medium fire alarm and protection security. This FACP uses two buses mode, monitoring up to 242 control points of every loop. Wall mounted design. It is compatible with complete range of electronic coding, remote control conding series' intelligent detectors, manual call point, input module, I/O module. The fire protection system can be divided into controller, detectors, modules and operation terminals. The FACP is combinded with main control module, driver board and communication board. Main control module uses the driving board to check the detectors, receive the digital signals and control the linkage modules. It also can be connected with other types of detectors such as flammable gas detector, alarm sensor, via input interface modules. The main control module gathers and deals with the information which received by the driving card to complete the control and functional operation. Isolator can be used for the security system properly working if there is fault part. The fire information is not only audible, optical and LCD displayed, recorded to printer log and the black box log. It can also be transited to FACP or CRT fire alarm dispay system via RS232.

...

...

...

Fire Alarm Control Panel (FACP) 10 loops is strictly conformable with Chinese National Standard Fire alarm control panel and fire protection linkage control system with a maximum capacity of max 64 loops connection with 15488 field devices. It has built-in linkage control and can work with other Tanda brand panels. It is suitable for using in large and medium fire alarm and protection security. This FACP uses two buses mode, monitoring up to 242 control points of every loop. Wall mounted design. It is compatible with complete range of electronic coding, remote control conding series' intelligent detectors, manual call point, input module, I/O module. The fire protection system can be divided into controller, detectors, modules and operation terminals. The FACP is combinded with main control module, driver board and communication board. Main control module uses the driving board to check the detectors, receive the digital signals and control the linkage modules. It also can be connected with other types of detectors such as flammable gas detector, alarm sensor, via input interface modules. The main control module gathers and deals with the information which received by the driving card to complete the control and functional operation. Isolator can be used for the security system properly working if there is fault part. The fire information is not only audible, optical and LCD displayed, recorded to printer log and the black box log. It can also be transited to FACP or CRT fire alarm dispay system via RS232.

...

...

...

Fire Alarm Control Panel (FACP) 10 loops is strictly conformable with Chinese National Standard Fire alarm control panel and fire protection linkage control system with a maximum capacity of max 64 loops connection with 15488 field devices. It has built-in linkage control and can work with other Tanda brand panels. It is suitable for using in large and medium fire alarm and protection security. This FACP uses two buses mode, monitoring up to 242 control points of every loop. Wall mounted design. It is compatible with complete range of electronic coding, remote control conding series' intelligent detectors, manual call point, input module, I/O module. The fire protection system can be divided into controller, detectors, modules and operation terminals. The FACP is combinded with main control module, driver board and communication board. Main control module uses the driving board to check the detectors, receive the digital signals and control the linkage modules. It also can be connected with other types of detectors such as flammable gas detector, alarm sensor, via input interface modules. The main control module gathers and deals with the information which received by the driving card to complete the control and functional operation. Isolator can be used for the security system properly working if there is fault part. The fire information is not only audible, optical and LCD displayed, recorded to printer log and the black box log. It can also be transited to FACP or CRT fire alarm dispay system via RS232.

...

...

...

Fire Alarm Control Panel (FACP) 10 loops is strictly conformable with Chinese National Standard Fire alarm control panel and fire protection linkage control system with a maximum capacity of max 64 loops connection with 15488 field devices. It has built-in linkage control and can work with other Tanda brand panels. It is suitable for using in large and medium fire alarm and protection security. This FACP uses two buses mode, monitoring up to 242 control points of every loop. Wall mounted design. It is compatible with complete range of electronic coding, remote control conding series' intelligent detectors, manual call point, input module, I/O module. The fire protection system can be divided into controller, detectors, modules and operation terminals. The FACP is combinded with main control module, driver board and communication board. Main control module uses the driving board to check the detectors, receive the digital signals and control the linkage modules. It also can be connected with other types of detectors such as flammable gas detector, alarm sensor, via input interface modules. The main control module gathers and deals with the information which received by the driving card to complete the control and functional operation. Isolator can be used for the security system properly working if there is fault part. The fire information is not only audible, optical and LCD displayed, recorded to printer log and the black box log. It can also be transited to FACP or CRT fire alarm dispay system via RS232.

...

...

...