Solar-Powered Wireless Photoelectric Beams Infrared Detector

  • Model: HB-T001-Q8
  • Shipping Weight: 8.5 kgs
  • 99 Units in Stock
  • Manufactured by: HB solar beams

 Ask a Question 

$158.00
Sale: $150.10

Please Choose:

Freq.



Add to Cart:
Wireless Beams Photoelectric Infrared Sensor HB-T001-Q8 100m detection distance and 80cm protection height. The wireless beam has 8 beams as light wall and each beam height is 8.5cm. Any two beams are completely blocked, the detector will trigger alarm.
This solar-powered beams are used as farm security, community security, school security etc.
Self-contained solar powered motion sensor alarm with sound. Built-in speaker and sound can be set as 5-60s or mute.
Wireless Beams adopt newest technology solar-power supply, no external power cord required and no external signal wire required for easy installation and maintenance. It report fault, non working, tamper to security center. It has built-in sounder and make on-spot alarm.
Installation video at beam installation
Specification of Solar perimeter beams:
1. Working Voltage: 3.3V
2. Battery type: LiFePO4li-ion battery
3. Battery capacity: transmitting terminal 500mAh, receiving terminal 1000mAh
4. infrared light wavelength: 940nm+/-20nm
5. Number of infrared beams: 8 beams
6. Wireless transmitting frequency: FM433MHz
7. Infrared distance: 100m
8. Wireless transmitting distance: open area 500-800m
9. Working environment temperature: -30~+70C
10. Maximum alarm times in 1 month:<=50times
11. Product dimension:1090*84*45mm

How to choose active infrared beams
There are different beams quantity such as 2 beams, 3 beams, 4 beams, 6 beams and 8 beams of photoelectric beam sensor. So, how many beams should I choose? The more beams means higher of protection height and longer of detection distance. For example, if the distance between two infrared holes is 35mm, then, for 3 beams sensor, the protection height is 70mm. For 4 beams sensor, any two neighbor beams are blocked, it will trigger alarm. Same for 6 beams or 8 beams sensor. So more beams will be with more security such as for bank. More beams means more power of infrared beam transmission and with stronger penetration to against interference of fog, sunshine etc.
And what does the infrared detection distance mean? It means the distance between the transmission terminal and receiving terminal. The actual installation distance should be less than 80% of the specified distance. For example, the specified detection distance is 100m, then the actual installation detection distance should be less than 80m. If no interference, the detection can reach to 6 times of specified distance. (6*100=600m). But environment interference should be considered for using.
There are some rules for active infrared beam installation. For example, if the beam sensor is installed on a low wall, the distance between the top of the wall and the lowest infrared hole should be around 150mm. Because the size of a normal person is 500mm(width)*200mm(thickness), that will avoid intrusion of people from bottom side of the beam sensor and false alarm triggered by small animals.
HB solar power infrared beam system can be easy calibrated.
1. Make sure that the eye can see the other end through the mechanical calibration hole at one end.
2. Ensure that the LCD displayed figures are large and stable.

Add wireless receiver, wireless siren strobe, wireless to wired alarm signal adaptor at solar wireless alarm

Customers who bought this product also purchased...

Currencies

Wish List  [more]

Log In to be able to add this product to your Wish List.

Manufacturers

Copyright © 2024 Vedard Security Alarm Systems. Powered by Vedard Security Alarm Technology